• Find the best mic frequency for your area

    I have found what seems to be the easiest to use frequency finder yet.

    Type in the addresses for the places you play at most frequently and note the channels that show green check marks for those locations. Then find a wireless mic with a tuning range that covers those channels.

    A few caveats:

    * The site isn't perfect. It doesn't consider TV signal attenuation from terrain or buildings. In other words, it may indicate that you cannot use certain frequencies in a particular location when in actuality, you can. Better safe than sorry though.

    * The data isn't perfectly current. New transmitters can pop up and create interference on frequencies that the site reports as clear.

    If you need to convert the TV channels to actual frequencies in MHz, choose the "View Full Map" button and you will see frequencies on the left side
    This article was originally published in forum thread: Find the best mic frequency for your area started by sawdust123 View original post
    Comments 5 Comments
    1. AbsoluteDJ's Avatar
      AbsoluteDJ -
      Sawdust this might be of help as well:
    1. AbsoluteDJ's Avatar
      AbsoluteDJ -
      This Just in from NAME:

      NAME Members,

      NAME has partnered with the FCC's Office of Intergovernmental Affairs to bring members the latest in the developments concerning wireless microphones that operate on frequencies in the 700 MHz band (which includes any frequencies between 698 MHz and 806 MHz).

      The FCC has passed a decision that will affect All wireless microphones that broadcast in the 700 MHz band. Microphones that Broadcast in this frequency band must cease operating no later than June 12, 2010. The FCC seeks to prevent unlawful interference with public safety entities and commercial users that operate on the 700 MHz band following completion of the Digital Television transition last June. In addition we hope to prevent NAME members from receiving interference while using microphones,

      If a microphone does not operate on frequencies within the 700 MHz band, no action is required.

      Wireless microphones currently operate in a variety of different frequency bands, including many frequencies outside of the 700 MHz band.

      Only those wireless microphones using the 700 MHz band must cease operating. Some wireless microphones that operate in the 700 MHz band can be successfully retuned to operate in frequencies other than 700 MHz. If the wireless microphone operates only in the 700 MHz frequency band, it will need to be replaced.

      Why did the FCC make this rule?

      Certain wireless microphones have operated in frequencies that are needed for public safety. When these microphones were first designed, the frequencies they used were in between the frequencies that television stations used to broadcast television programs. With the completion of the digital television (DTV) transition on June 12, 2009, television stations no longer use the frequencies between 698 and 806 MHz (the 700 MHz Band) for broadcast. These frequencies are now being used by public safety entities (such as police, fire and emergency services) and by commercial providers of wireless services (such as wireless broadband services).

      The wireless microphones that had been operating in the old TV broadcast channels can cause harmful interference to these public safety and wireless consumer services. Therefore, all users of wireless microphones (or certain low power auxiliary stations) that operate on any of the frequencies in the 700 MHz Band - including both licensed users (under Part 74) and unlicensed users - have to stop operating in this band.

      The FCC is only prohibiting the use of wireless microphones that operate in the 700 MHz Band. You may continue to use wireless microphones that operate on other broadcast frequencies. Microphones with cords are not affected by the FCC's decision.
      What Happens If Someone Does Not Stop Using a 700 MHz Band Wireless Microphone?

      Using the 700 MHz Band for a wireless microphone after June 12, 2010 could be extremely dangerous and could even be life threatening. Police and fire departments, and other public safety groups, use frequencies in the 700 MHz Band. Interference from wireless microphones can affect the ability of public safety groups to receive information over the air and respond to emergencies. Harmful interference to these communications could put you or public safety personnel in grave danger. In addition, use of your microphone can cause unlawful interference to consumer services provided using the 700 MHz Band. Failure to comply with this FCC requirement may lead to civil and/or criminal penalties. This will be determined by the FCC and law enforcement on a case by case basis.
    1. littlemike's Avatar
      littlemike -
      Good stuff, Sawdust, thanks. I downloaded the iPhone app for this.
    1. Varment's Avatar
      Varment -
      The iPhone app will be more helpful, even thought it's not that great. The website is horrible. It is very slow which makes it almost unusable.
    1. theorlandodj's Avatar
      theorlandodj -
      I called ElectroVoice after having issues w/my wireless mic and they said I could call them any time with the address of my gig and they'd tell me what channel to put the receiver on. It has helped tremendously!
  • Recent Activity


    Me loving some Meyer subs

    Thread Starter: jaswrx

    I have been doing this venue a lot, and it definitely holds 500 people (outside) and the Bose does incredibly well, but the bass does drop off as the dance floor is close to 75 feet away from the speakers. When the L1 is not blocked and there is a clean line, they throw really far. So this...

    Last Post By: djrox Today, 01:31 PM Go to last post

    Looking to get the Soundcraft Ui 16 digital mixer.

    Thread Starter: DannyG2001

    How many are using digital mixers? I am looking at a Soundcraft digital mixer which will allow me to stay in the audience permanently and not have to rush back to my system to adjust sound.

    Last Post By: jaswrx Today, 12:12 PM Go to last post

    Volume control knob for line level to a speaker

    Thread Starter: rockingdj

    I currently use a RapcoHorizon Laptop Interface LTIGLBLOX as a volume control hookup out of my laptop to a K10. This requires me to use channel 1 in mic mode, xlr to xlr all the way. I'm now searching for a like kind volume control setup that will let me convert to line level instead, so I can use...

    Last Post By: jaswrx Today, 12:30 PM Go to last post

    I got an interesting and funny phone call on Monday.

    Thread Starter: djmachoman

    At least to me I found the phone call funny. Let me get this out of the way first. I love these kinds of phone calls! I just wish I could get many more of them like this one. Got the call from someone who is getting married in May of next year and looking for a DJ to do their wedding. So...

    Last Post By: djmachoman Today, 01:55 PM Go to last post

    Sucks Fee

    Thread Starter: rockingdj

    For venues that are a pain to load-in and/or setup-in, do you quote higher than your standard rate? If a venue requires more gear to get the sound sounding good at a venue do you quote higher or suck it up?

    Last Post By: djrox Today, 01:06 PM Go to last post

    No line breaks when I post. WTF???

    Thread Starter: sawdust123

    OK all, something is going on here and I can't figure out what. DJchat is not recognizing my line breaks. This just started a few days ago. No other site or program is having this problem. It must be some weird setting here I can't find. Any clues?

    Last Post By: djrox Today, 01:23 PM Go to last post
  • Sponsors


    Djchat.com is gold certified